How to Clean Headlights With Toothpaste

There are many quick and easy ways to clean headlights and this article will go over a few of them. This is an inexpensive way to get your headlights looking good again without having to pay for expensive car detailing services.

There Are Three Parts To Cleaning A Headlight With Toothpaste.

1. Wash & Tape the Headlight
2. Polishing Your Headlights
3. Applying a Sealant

Wash & Tape the Headlight

First things first things, You need to park your car in a please when you can do those things peacefully. Then you can removing as much dirt and debris from the headlights using with glass cleaner or soapy water.

Wipe your headlights clean with a towel or chamois to remove any remaining streaks or drops of moisture once they’re clean. Dry the edges of the covers, too before polishing them, there will be less chance of scratching or damaging the surface during the process. Last things you can do in this part Before taping off your lights, make sure they are completely dry so tape sticks properly.

Polishing Your Headlights

Now that your headlights are clean and dry, you can get started with the polishing process. There are a variety of different products available for this step such as toothpaste, car wax or rubbing compound but we will be using toothpaste in our example here since it is an inexpensive alternative to other options on the market.

Make sure your headlights are completely dry before you begin the polishing process as well and then apply a thin layer of toothpaste onto one headlight with an old rag or sponge. Now start rubbing in small, circular motions to buff the paste into the surface of your headlight for about three minutes per side. After that time is up, just use a clean rag or water to wash off the toothpaste residue.

Applying a Sealant

After you have polished your headlights using the toothpaste method it would be beneficial to apply an automotive sealer on top of them for added protection against future damage and grime build up. There are plenty of different brands available with each claiming to be the best so it is up to you which one you try out first.

Just make sure all traces of toothpaste are gone before applying a sealer and don’t skimp on this step, as good protection for your headlights will save money in the long run by preventing further damage that would require professional services or headlight replacement.

The sun’s rays, which are harmful to vehicles’ headlight covers, cause oxidation. A decent UV sealant will prevent the formation of oxidation on your vehicle’s headlight covers as a result of sunshine exposure.

Headlight Restoration Kit

The headlight is the most exposed part of a car to surroundings. So, it becomes filthy very fast. Headlight restoration is a process of cleaning and refinishing the headlights. A headlight restoration kit is an instrument widely used worldwide to clean car headlights that avoid accidents during driving. There are many headlight restoration kits. The most famous and functioning headlight restoration kits are mentioned below-

1. 3M HRK (Headlight Restoration Kit)
2. Sylvania HRK
3. Rust-Oleum wipe new HRK
4. Mother NuLens HRK
5. Meguiar’s 1-Step HRK
6. Rain-X HRK
7. Turtle Wax HRK
8. Philips HRK with UV protection.
9. CLT HRK
10. Cerakote ceramic HRK

And many more. If you are still confused about Cleaning or What Headlight Bulb Do I Need, I suggest checking this. Grab the suitable headlight for your car, and don’t forget to adjust your car’s headlight for avoiding any unwanted accidents. Also, you can wash filthy headlights just using toothpaste for more clear vision. You can choose any of the headlight restoration kits for more cleaning.

Conclusion

There are many quick and easy ways to clean headlights. This article will go over a few of them. You can use toothpaste, car wax or rubbing compound among other things for this purpose but we used toothpaste in our example here because it is an inexpensive alternative to most options on the market.

Make sure your headlights are completely dry before you begin the polishing process. Apply a thin layer of toothpaste onto one headlight with an old rag or sponge. Now start rubbing in small, circular motions to buff the paste into the surface of your headlight for about three minutes per side.

Frequently Asked Questions (FAQ)

How long do you let toothpaste sit on headlights?
Toothpaste is an effective way to clean headlights, but you need to let it sit for at least 15 minutes. If you don’t let the toothpaste sit long enough, it won’t be as effective at cleaning the headlights.

Related Article

• 3057 vs 3157 Bulb