Engine oil is a key to the longevity of your vehicle’s engine. It lubricates, cools and cleans the engine parts. You may be wondering which type you should choose for your car 0w20 or 5w30. This article will discuss both types to help you make an informed decision about what kind of oil best meets your needs!
0w20 Vs 5w30 engine oil Table
The answer may surprise you! In this table, we’ll discuss how these two oils differ from each other, when they should be used, and which is best for your car.
Viscosity Index 173
Viscosity Index 154
Viscosity 100ºC (212ºF) 8.7
Viscosity 100ºC (212ºF) 10.5
Superior Engine Protection By Fighting Engine Stress: Heat, Deposits And Wear
Thicker Anti-wear Film Protects Against Friction and Wear
Suited Temperature Extreme Cold State And Average Summer
Suited Temperature Warmer Weather And Average Cold Weather
Suitable Vehicle Are Hybrid And Gasoline Engine, Toyota Corolla Subcompact Or Compact Car
Suitable Vehicle Are SUVs, Small Vans, Trucks & Selected Cars
Fuel Economy Top In The Market
Excellent Fuel Economy
To Help Carry Excellent Protection For Engine And Fuel Economy Satisfaction
It Is Designed For Providing Unique Levels Of Performance And Engine Protection
0w-20 Oil Are Mostly Known As Low Viscosity Oil & Best Performance
5w-30 Motor Oil Is Another Very Good And Highly Efficient Motor Oil
A lot of people wonder why you should compare 0w20 to a different oil like the popular and widely used synthetic, conventional or blended oil that car manufacturers often recommend. While these oils are known for their high level of performance, they may not be ideal in every case! Because multiple grades of engine oil are available to consumers that range from 0w30 to 20w50. Which is best for your car can be confusing, but it doesn’t have to be!
0w20 oil is one of the lighter-weight oils available on the market today and should only be used when recommended by your vehicle manufacturer. The lower viscosity rating in this grade makes it ideal for the cold winter months when temperatures can drop to extreme lows.
0w20 oil may not be best for your vehicle in warmer weather because it is so thin that it doesn’t provide adequate lubrication at higher speeds or under extreme pressure, leading to engine damage over time! Other oil grades are available including 0w30, 0w40 and a wide range of high viscosity grades that are best to use during the warm summer months.
Deciding which oil is right for your car can be confusing! That’s why we’re here to help you choose the engine oil that has been specifically designed for your vehicle and meets or exceeds all recommended manufacturer specifications. Don’t let your vehicle’s engine suffer from a lack of protection, contact us today for more information!
What If I Use 0w-20 Instead Of 5w30?
0w20 oil is recommended for use in the cooler months, but it also provides more accurate viscosity readings resulting from its higher honey-like consistency. It will flow better at colder temperatures and provide a car with optimum engine protection throughout the year. However, using 0w20 oil is not suggested in extremely cold climates where engine wear may be increased as a result of its thinner viscosity.
5w30 oil is recommended for to use in the warmer months, as it is more dense and thicker than 0w20. This allows for an easier startup because it will flow at the temperatures reached during startup in the morning even if those temperatures are low. Additionally, this viscosity grade oil has a greater ability to provide car engine protection throughout its life cycle by maintaining consistent performance through all seasons.
What Is 0w20 Oil?
It is low viscosity oil produced for the colder region. In the name, you can find weight, thickness which in technical terms means viscosity. Oil is very thin when it is heated as it barely holds any weight and quite thick when it cools down. Fully synthetic and efficient optimization has opened the path for much wider use for oil like SUVs and trucks which was not a common scene. If suggested by the manufacturer, it can be used to replace 5w20.
Why Use 0w20 Motor Oil?
Oil names are standardized by the Society of Automotive Engineering, in short SAE. In this particular oil the 0 and 20 refers to low and high-temperature viscosity and the W denotes as winter. So we can understand the fact that the concentration of the oil is for colder regions. It eliminates cold starts.
Cold starts wear out the engine in the fastest way possible and it is a familiar scene in winter as the engine cools down quickly. Being of such low viscosity, the oil heats up almost instantly and starts the engine. That’s why the engines provide better performance and a longer lifespan. With such vital work done by the oil, economical fuel optimization and superior engine efficiencies are overlooked.
How Often To Change 0w20 Oil?
The topic of oil change depends on the usage of the vehicle. When the vehicles are used for heavy-duty, then the oil change comes into play after 5,000 miles or six months. Although the oil’s durability has bettered the interval from its previous to a new best of 10,000, the owner must check for any top-off to ensure the best outcome. On an additional note, if you can’t find the oil or it is unavailable, you can use 5w20 instead of it and change it back to your oil after 5,000 miles.
Which oil is better 0w20 or 5W30?
It really depends on your individual needs and preferences. If you’re looking for an oil that will help improve your fuel economy, 0w20 oil may be the best option. However, if you’re looking for an oil that can provide better protection against wear and tear, 5W30 oil may be a better choice. Ultimately, it’s up to you to decide which oil is best for your car.
Are 0w20 and 5W30 interchangeable?
Thank you so much for reading this article on Engine Oil 0w20 vs. Other Grades: Which is Better? Check back next week to find out what oil best meets your needs and don’t forget to ask about our multi-point inspection and oil change services!
|Check Price on Amazon||Check Price on Amazon|