Peragon Vs Bakflip MX4 Tonneau Cover

Peragon Vs Bakflip MX4 Tonneau Cover
Peragon Vs Bakflip MX4 Tonneau Cover

It is not always easy to find the right thing you are looking for. Especially when the market is saturated with numerous products and brands for the solution you need. The truck cover bed, also known as a tonneau cover, is relatively newish to many other auto components you know or use heretofore.

Even by this time, many brands and models showed up in the market to cover up the carriage volume of your truck. Peragon and BAK are the two of them. In today’s discussion, we tried to find out which one you may consider buying between Peragon F4-QC and BAKFlip MX4.

Peragon Vs Bakflip MX4 Table

The two most popular options on the market today are Peragon and Bakflip MX4 Tonneau Cover. In this table, we will compare these two covers and decide which one is right for you!

Weighted 40 pounds 

Weighted 71 pounds 

Compatible With Only 66 Inch Bed Size

Offer 3 Different Sizes Of 67.1, 78.9 And 97.6 Inches

Satin Black Powder Coat Finish

Premium Matte Finish

Deadbolt Key Lock System

Dual Action Tailgate Seal Automatically

Maintain Water Proofing With Automotive-Grade EPDM Rubber Seals

Use Rubber Seal To Stop Leaking

Solid Aluminum With Single Piece Of Aluminum Guide Rails

Aluminum Panel And Rails Along With Pre-molded, Die-cut, Shock-absorbent Bumpers

1 Years Of Limited Warranty

5 Years Of Limited Warranty

Takes 2 To 3 Hours To Install

Can Be Installed Within Hour

Retracts Quickly And Easily So You Can Haul Large Cargo

Relatively Light, Yet Offers Heavy Duty Durability

Why Compare

Both of the models discussed here to come up with hard folding technology to cover up your tonneau have some otherness. It will surely help you to go for the buying decision if you read this, where our experts speculate both models side by side.
Let us dive into the topic and find which one works best for you in terms of compatibility, material used, outlook, usability, warranty and installation process.


From the Peragon’s manual, we are informed F4-QC is specially designed for Ford F150 and Lincoln Mark LT truck models. But still, it can be compatible with other vehicle brands with the size of a 66 inches truck bed. This is the only size Peragon currently offers.

On the other hand, BAKFlip MX4 offers three different sizes of 67.1, 78.9 and 97.6 inches. Before buying, measure your truck bed to confirm which size variant works for you. The three different sizes ensure much compatibility with many vehicle brands along with Ford and Nissan.


Usually, hard folding covers are made of the canister, steel or aluminum. Here, both brands ensure style and durability by using industry-grade aluminum for panels and mounting rails. Peragon F4-QC ensures fine craftsmanship with the solid aluminum-made cover along with guide rails.

Using a single piece of aluminum angle, side rails are much more durable to mount the entire covering panel more safely, further helping the cover for smoother operation. The EPDM rubber seal is used to get rid of water leaking, which is also used in MX4. Its covering panel is made of heavy-duty aluminum with shock-absorbent plastic bumpers on each side of it.


Peragon aluminum guide rails stand just one inch above the bed, which is merely visible from outside. The covering panel stays lower than the rails and remains parallel with the vehicle tailgate. But the fascinating part is, it does stack up on your cover bed. When it remains open, the whole panel is folded into parts and stays behind the driving seat. Along with the unique design concept, every material is furnished with a satin black powder coat that looks quite premium.

All the exterior parts of BAKFlip MX4 are coated with a gorgeous matte finish black color. Cover panel railing clamps installed just under the vehicle body to ensure a sleek appearance with a robust flush mounting design. But when it remains partially open, the cover panel needs to be stacked upon the bed. That looks very normal for the traditional hard folding covers.
If you are concerned about outlook, surely Peragon wins the bet with their unique quick-release folding technology.


The quick-release folding mechanism of Peragon helps it look stunning but takes some precious space of your truck bed while you use it fully open. Otherwise, you can take off the cover just within 30 seconds without using any tools. F4-QC considers weatherproofing quite nicely with the proper sealing of EPDM. By including a deadbolt key lock system, it defends your bed storage as long as the tailgate is locked.

Elsewhere, MX4 offers a traditional folding mechanism that can be considered as the industry standard by this time. It allows you to keep your cover with several full closed, fully open, or partially open options by flipped up over the bed. They can be rated up to 400 lbs of weight evenly distributed, which is considered a good plus for this model. Instead of any locking system, it introduces dual-action tailgate seals to open or close the cover.


You never want to buy something that receives manufacturing faults before serving for a particular time. That is why a warranty comes up for expensive auto parts and gears. BAKFlip assures to get your back with five years Limited Warranty period. From the purchasing date, any defects found in material and workmanship will be managed free of cost where Peragon offers only one year of the limited warranty period. Certainly, BAKFlip is an obvious choice when you really worry about the warranty; and you should take this seriously.


F4-QC takes 2 to 3 hours to install the device on your truck bed. In most of cases, you do not need to use any power screwdriver or drill machine for the process. Contrariwise, the installation of MX4 is much easier for its widely used mounting mechanism. If you are not a professional, you might still not take more than an hour to install this.

So far, I hope this will cover most of your concerns to determine which one you will go for. The verdict goes with BAKFlip- which offers a more effortless and conventional covering system; simultaneously, you don’t care about appearance or exterior.


BAKFlip F4-QC is the clear winner in this comparison of BAKFlip MX4 vs Peragon Truck Bed Cover. It stands out with a more conventional design concept available at an affordable price. Contrarily, Peragon is meant for those who are concerned about the appearance of their truck or don’t need to open/close it frequently in a day.

Instead, MX4 is meant for professional users who need to keep safe their stuffs within an enclosed bed cover system that looks quite pretty on your vehicle when it remains open; along with the heavy duty aluminum construction bracket which you can trust easily. All in all, how much you are ready to pay is up to; but if you want my opinion, I’d recommend Peragon only if the cover is not a compulsory part for you.

Frequently Asked Questions (FAQ)

BAKFlip MX4 is one of the best selling hard tonneau covers on the market for a reason. It’s made in America, features a sturdy aluminum frame, and has a sleek matte finish that looks great on any truck. Plus, it’s easy to install and use, making it a great choice for anyone looking for a

The Peragon bed cover is designed to hold up to 1,000 pounds of evenly distributed weight. This means that it can easily hold the weight of multiple people, making it perfect for couples or families who want to enjoy the outdoors together. Additionally, the bed cover is made from tough, durable materials that can withstand even the most strenuous activity, so you can rest assured that your belongings will be safe and sound no matter what.

The BAKFlip MX4 is a great choice for those who are looking for a waterproof tonneau cover. This cover features a patented EPDM sealing system that makes it completely watertight. Additionally, the BAKFlip MX4 is made from durable materials that can withstand even the most extreme weather conditions. So, if you’re looking for a tonneau cover that will keep your cargo dry and protected, the BAKFlip MX4 is an excellent option.


Peragon truck bed covers are proudly made in the USA! We have a team of skilled workers who craft each cover with care and attention to detail. We use only the highest quality materials to ensure that your cover will last for years to come. Whether you’re looking for a simple and functional cover or something more stylish, we’ve got you covered. So when you’re ready to hit the road, know that your Peragon truck bed cover was made with American pride.


Peragon Cover

Bakflip MX4

Check Price on AmazonCheck Price on Amazon

Related Article

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top