Shock Absorber Repair: How to

Shock Absorber Repair: How to

If you have a car, then it is likely that at some point in time you will need to replace your shock absorbers. Shock absorbers help control the motion and speed of a vehicle by dampening the effect of bumps and potholes on the chassis. They are an important part of your suspension system, which also includes springs, struts, bushings, tires and wheel alignment.

You should never try to repair or adjust them yourself as this can lead to serious injury. In this blog post we’ll explore everything about shock absorber repairs: what they do for your car; why they might break; how often they need replacement; when you should get them inspected; and more!

How to Repair a Shock Absorber

Step 1: Disassembly shock absorber

First of all Disassembly shock absorber from your car . This way you can inspect it and find out if there are any problems. You will need to use a wrench, ideally with a socket attached so that the bolt head is exposed for easy removal. Twist off the bolts to take apart your shock absorber from its car suspension system mounting brackets and body mounts.

Step Two: Inspect Your Shock Absorber

Once you have your shock absorbers removed from the car, inspect them carefully for any problems. You will need to check all of these things: bushings; seals and o-rings on piston rod end; dust boot (if present); connectors or mounts if they are broken or missing. If there is a problem with any part of your shock absorber, then it will need to be replaced.

Step Three: Replace Part(s) That Need Repair or Replacement

If you have found any problem with the condition of your shock absorbers and they are in poor shape, then now’s the time for replacement! You may want to consult a certified mechanic as well to get their opinion about the best options for replacement.

Step Four: Reassemble Shock Absorber

Reassembly of shock absorbers is just as important as inspection to make sure that it does not happen again in a short time period. Follow these steps to fully and correctly re-install your new or repaired shocks: Mount connectors or mounts if they are broken or missing; Lubricate all bushings, seals and o-rings with grease for shock absorber function. Coat the dust boot (if present) with silicone grease to provide protection against corrosion.

Step Five: Replace Shock Absorbers on Vehicle

Now that your old shocks have been removed and replaced, you are ready to reinstall them on your vehicle. Reinstall shock absorbers onto car suspension system mounting brackets and body mounts, then tighten bolts securely with wrench so that they hold properly in place.

Step Six: Test Shock Absorber

Once the new or repaired shocks have been re-installed on your vehicle, it is time for a test! Observe the vehicle’s behavior when driving over bumps and potholes. Does it have any of the symptoms that you noted earlier? If so, then your shocks still need work or replacement.

Step Seven: Repeat Steps as Necessary

If you find yourself repeating steps with shock absorbers on your car, then you are probably not getting the job done. Shock absorber repairs can be difficult, so it is important to take your time and do these steps carefully in order for them to hold up well on a vehicle.

Step Eight: Replace shocks as needed

Shock absorbers should last between 12-18 months before they need replacement. But if you are noticing problems, then it is time to replace your shocks.

Step Nine: Prevent Shock Absorbers from Breaking

Shock absorber repairs can be difficult and require a lot of care on the part of a mechanic. You may want to look into preventative measures in order to make sure that this doesn’t happen again. One way to do this is by having your car inspected regularly so that any problems can be found and repaired quickly.

In order for a shock absorber to work properly, there are many different factors that must align together in the right balance: less than desired steering response from vehicle; excessively high rates of wear and tear on vehicle suspension components; too much bounce when the car is driving over bumps and potholes.

Conclusion

In conclusion, shock absorber repairs are important for a vehicle to function properly. Shock absorbers need to last between 12-18 months before they will need replacement, but if you notice any problems then now is the time to do so. Preventative measures can be taken by having your car inspected regularly so that any issues can be corrected quickly.

Related Article

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top