Detroit Axle Vs TRQ Wheel Bearing

Detroit Axle Vs TRQ Wheel Bearing
Detroit Axle Vs TRQ Wheel Bearing

Have you ever noticed that you are not getting an M+S rated speed rating after changing your vehicle wheel? This phenomenon is quite familiar to me because most of the drivers claimed to me previously that they have such issues. They change the shock absorbers, vehicle struts but still they can not get the desired performance.

Because the wheel bearing or wheel hub assembly used in that vehicle is not compatible with the demands of the vehicle. Usage of the wrong wheel hub assembly in your vehicle wheel will give you poor performance and decrease the wheel’s efficiency. So, choosing the perfect wheel hub assembly is important to get a comfortable ride.

Here we have two solutions for you. One is Detroit Axle, a common name in the automotive industry. Another one is TRQ which is worth mentionable for its outstanding features. So, let’s find out the preferable one for your vehicle between them.

Detroit Axle Vs TRQ Table

We’re going to compare these two brands and give you our verdict on who’s worth your money. Keep reading to find out!

4WD Front Wheel Hub Assembly

TRQ Front Wheel Hub Assembly

Fits 4WD Models Only

Fit In Any 6 Lug Wheels

Complete & Ready to Install

Installation Is Easy & Swift

Pre Coated With Anti-corrosion Lubricant

Reduce Friction & Enhance Fuel Economy

 Position: Front Left or Right 

Anti Lock Brakes Sensors

Comes with ABS Sensors

Comes with ABS Sensors

Comes with 10 Year Warranty 

Limited Lifetime Warranty

All Parts Heated By High Temperature To Ensure

The Reliability & Perfect Fit

It Is Made Of Heavy Duty Metal To Ensure

Smooth And Long Lasting Operation

Manufactured To Exceed Original Equipment Standards

Comes With An Abs Sensor That Automatically Controls Speed

Top Quality Seal Design Ensures A Clean Long Lasting Hub Bearing

2007-14 Mazda CX-9 Rear Driver & Passenger Side All Wheel Drive

Why Compare

Why shouldn’t we compare these two masterpieces? Detroit Axle has been ruling the automotive industry for years. It is questionable that the wheel hub assembly of Detroit Axle is holding the crown position in this industry. On the other hand, TRQ has been providing top-notch quality products to customers for years.

Though these two are having some similar features, they are a little bit different from each other. The vehicles which will suit the Detroit Axle wheel hub assembly may not be compatible with the wheel hub assembly of TRQ. So, installing the wrong wheel hub assembly will be a foolish job and waste a lot of money. So, to find out the perfect one from these two, a comparison table can be made.

Detroit Axle Wheel Bearings Review

Drilled and Slotted Rotors:  One of the upgraded features of the wheel hub assembly of the Detroit Axle is the drilled rotors. These are slotted and ensure a better speed rating. As a result, you will get an M+S rated speed rating while driving your vehicle both on-road and off-road.

2x Front Wheel Bearing: The front wheels are used for perfect steering and control of your vehicle. So a durable wheel hub assembly is needed for these front wheels. The wheel hub assembly of the Detroit Axle will give you precise steering and control in the off-road.

Easy Installation: Installation of the vehicle accessories are a monotonous job to do. This takes a long time to install a vehicle part. But the wheel hub assembly of Detroit Axle can be installed easily within a short period.

Friction Reduction: Friction is a necessary evil for vehicles. The metal-to-metal friction of the wheel decays the wheel, which decreases the lifespan of the wheel. The wheel hub assembly of Detroit Axle reduces friction significantly.


  • Provides a better stopping vehicle.
  • Comes with ten years of warranty.
  • Reduces metal to metal friction within the wheel significantly.
  • Contains an ideal 6-bolt design for ensuring compatibility.


  • Fits 4WD models only.

TRQ Wheel Bearings Review

Anti-lock Brake Sensors: This is considered one of the most special features of the wheel hub assembly of the TRQ. This sensor can respond immediately to any braking command is given by the driver. This helps a lot to the vehicles off-road. In this way, it increases the quick braking ability of a car.

Pre-installed ABS Sensors: The ABS sensors are used to measure the wheel rotation per unit time. This is a type of tachometer installed in the wheel of a vehicle to determine the vehicle’s velocity appropriately.

Better Efficiency:  Efficiency is related to the input and output of an accessory. The wheel hub assembly of the TRQ is efficient enough to provide outstanding performance.

Smooth Ride: Smooth ride requires less vehicle shaking and damping control. The wheel hub assembly of the TRQ provides you a smooth ride both on-road and off-road by reducing noise and ensuring proper damping control.


  • Enriched with high-quality ABS along with sensor wires.
  • Fits in the six lug wheels.
  • The hubs and mounting bolts are pre-installed.
  • The wheel studs are attached.


  • The slug nuts may not be compatible.

Will Detroit Axle Fit In My 2002 GMC Sierra 1500 4wd?

Yes, the Detroit Axle wheel bearings are only compatible with the vehicles of the 4WD category. So, it will fit in your 2002 GMC Sierra 1500 4WD.

Final Verdict 

These all are about the wheel hub assemblies of the Detroit Axle and TRQ. Though both are quite affordable to buy, they are compatible with specific vehicles. Otherwise, you will not get the desired output from these two accessories. So, finally, the decision is in your hands, which one between these two will be preferable and perfect for your vehicle?

Frequently Asked Questions (FAQ)

Detroit Axle is an American company that manufactures automotive parts. The company is based in Michigan and has been in business since 1986. Detroit Axle produces a wide range of products, including brakes, suspension components, and engine parts. While the majority of Detroit Axle’s products are made in the United States, some components are sourced from other countries. However, all of the company’s products are designed and engineered in the United States. So, when you purchase a part from Detroit Axle, you can be confident that it was made with American quality and craftsmanship.
There are two types of wheel bearings: ball and roller. Ball bearings are the most common type of bearing and can handle both radial and thrust loads. Roller bearings can handle only radial loads, but they are capable of handling higher loads than ball bearings.
Detroit Axle has been in business since 2003. We are a family-owned and operated company specializing in OE quality suspension and steering parts. Our mission is to provide our customers with the best possible experience by offering top-quality products at an unbeatable price. We’re proud to be one of the leading suppliers of suspension and steering components for both domestic and import vehicles.
The average cost of a wheel-bearing job is between $200 and $400. However, this can vary depending on the make and model of your vehicle as well as the severity of the damage. If you’re experiencing issues with your wheel bearings, it’s important to have them checked and repaired by a professional as soon as possible to avoid further damage.
You can replace just one wheel bearing, but it’s generally best to replace all four at the same time. This will ensure that all of your bearings are in good condition and helps prevent further damage to your car’s suspension and steering components.


Detroit Axle Wheel Bearing

TRQ Wheel Bearing

Check Price on AmazonCheck Price on Amazon

Related Article

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top