BakFlip F1 VS BakFlip MX4 Tonneau Cover

BakFlip f1 VS BakFlip MX4 Tonneau Cover

Vehicles are an everyday part of our life. We use them for us to be carried to distant places in a short time and not just us we rely on them relentlessly for carrying goods. Pickup trucks are mainly the type we use for carrying heavy loads. We arrange our valuables on the back of the truck and rely on the quality for safe-keeping.

But there is one little yet crucial part out of the frame regarding weather conditions. Fog, dust, rain, and snow can be a huge problem for our completely exposed goods. That’s when the question of BakFlip comes into consideration. Not only do they protect and shield our properties but they also prevent them from permanent damage.

Bakflip MX4 Vs F1 Table

Each of the covers is custom-made to fit your sort of truck bed. So, apparently, there is no wrong choice when it comes to choosing between these two. Yet, of course, you do want to know what you are looking for the best kind of output under such circumstances.

Top of the cover can handle a load rating of 400 lbs

Top of the cover can handle a load rating of 400 lbs

Made out of reinforced-fiberglass, polymer top and aluminum underside in the inner surface.

Same us F1 its too made out of aluminum.

Opening style is basically “folding”.

Identical to its opponent the opening style consists of the “folding” process.

Lock type is Non-locking.

Lock type is Non-locking.

Sealing design consists of latch at the sides.

Sealing design is basically locking of the rails.

Comes with 3 years warranty.

Comes with 5 years warranty.

The coverage against dents and scratches are highly impressive.

The coverage against dents and vibration and scratches can be more improved.

The F1 must be lifted up to close the tailgate and only then can be clicked on to its position.

The MX4 allows the latch to be attached while the tailgate is being open or closed.

The leaking issues can be improved.

The leak defence against the pouring rain is pretty impressive.

You can install with a wrench and socket. No drilling is necessary

You can install with a wrench and socket. No drilling is necessary

Both the truck bed covers carry a warranty of 3 years! So, you are not a risk of massive regret here. Now let’s take a look at their features:

BakFlip F1 Review

The construction is strongly built for advanced impact resistance. Consumers, on average, have noted that F1 gives special protection against the never-ending constant dent and road shocks. Thus obviously giving F1 some extra bonus points over other covers available in the market.

Upgraded tailgate operation allows dual action except for some exceptions. Except for the Tacoma or 05-16 Ridgeline, F1 allows a dual action that allows the tailgate to be open or closed with the cover being exposed.


The core is densely made yet with foam to prevent damage to the objects. The objects inside are prone to road shocks that make them hit the inner wall. But with F1, the core inside being made out of foam gives protection from within.

Hardware and Components

It is specially made for lightweight and heavy-duty hardware and components. The cover not only supports the minor objects but also is built for maximum usage to ensure the weight of the heavy-duty products for long, uncertain journeys.

Overall Weight

The weight is evenly spread over the surface. Thus some pressure on a particular point won’t really force the whole cover to collapse.

100% full bed access

Doesn’t block the inner space. Thus giving access to the whole truck bed to consist more of the goods without consuming any valuable corner.

Limitations of BakFlip F1

Among all the pros, one of the most downright facts about F1 is that it is instead a bit costly compared with other models. It needs a certain kind of structure to fit in. Otherwise, it won’t serve the purpose. As if it is almost as bad as having no cover at all. Moreover, there still might be dripping wetness on the edges due to not the entire coverage.

Bakflip MX4 Review

The matte finishing in the edges allows better protection against leakage. The rain and dripping snow, fog, or dust may find it hard to pour through the strong resistance.

The relatively smoother appearance certainly buys some extra points in the overall outlook that compliments your vehicle and provides service.


The shock-absorbing bumpers prevent the road vibration from damaging the valuables in the bed. One of the most important facts that MX4 made sure of.

Dual operation with tailgate

One of the biggest pros of the MX4 is that the cover can stay closed. Yet, the tailgate can be independently operated without the coverage being disturbed.

Limitations of MX4

Even with all the edge and corner finishing, MX4 fails to ensure 100 % waterproof coverage. In short, leaving the truck bed with dripping wet corners.

Are MX4 secure?

Answer: The cover is lightweight yet strongly built and can carry 400lbs to spread evenly. In short, yes, it is absolutely safe to use MX4.

Do BakFlip covers leak?

Answer: Yes, even with all the updated formation, they do leak ensuring optimized service to the clients.

Our Observation

The main difference between BakFlip MX4 and F1 Tonneau Covers is in the waterproofing they offer – with the MX4 being slightly better in this regard. However, the F1 is more robust and more durable overall, making it the better choice if you’re looking for a cover that will withstand heavy use.

The F1 has fiberglass-reinforced panels that protect it from dents, scratches, and other damage. These panels also provide standard UV protection. The MX4 has aluminum panels that protect it from UV fading. These panels make the truck bed cover lightweight and easy to open and close.

Frequently Asked Questions (FAQ)

Yes, the BAKFlip F1 tonneau cover locks in place to keep your belongings safe and secure. You can rest assured that your gear will be protected from the elements and thieves when you have this tough, reliable cover in place. Plus, the sleek design looks great on any truck!

What is the difference between the BAKFlip F1 and MX4?
If you’re looking for a great tonneau cover that’s easy to install and offers good protection for your truck bed and cargo, the BAKFlip F1 is a great option. If you’re looking for a more durable cover that will last longer and provide better protection from the elements, the MX4 is a better choice.

Yes, the BAKFlip MX4 is waterproof. This means that you won’t have to worry about your belongings getting wet if you’re caught in a rainstorm or if you accidentally drop your truck bed cover into a puddle. Plus, the water-resistant material will help keep your truck bed looking clean and new for years to come. So, whether you’re an avid outdoorsman or just someone who wants peace of mind, the BAKFlip MX4 is the perfect choice for you.



Both the covers are perfect examples with their modified design. They both have their own sets of pros and cons. In short, they are both worth your money with the same life expectancy and maximum coverage. Ultimately, feel free to choose according to your style and needs. I hope this article helped you make a better decision.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top