Liqui Moly Mos2 Vs Ceratec Oil Additive
If you’re looking for an oil additive that will protect your engine and keep it running smoothly, you may be wondering which product to choose: Liqui Moly Mos2 or Liqui Moly Cera Tec. Both additives are made by Liqui Moly, a German company that is known for making high-quality automotive products. So, which one is the best?
Ceratec Vs MOS2 Table
We’ll try to know the details about these additives. Also, we will dig deep about why there are so many debates about which one is better.
Creates a heavy-duty lubricant film on metal surfaces
Prevents direct metal-to-metal contact & increasing service life
Liqui Moly Mos2 has potent additives
It has ceramic particles that make it stronger
Helps to reduces friction & has antifriction properties
Has high-tech ceramic wear protection
Improve the Significant amount of fuel and oil saving
Reduces fuel consumption in gasoline and diesel engines
Suitable for all commercial motor oils in gasoline and diesel engines
Best for engines, manual transmissions, pumps and compressors.
Compared to Liqui Moly Ceratec, it is a bit inexpensive
Expensive than Liqui moly mos2
This oil makes a solid lubricant layer that can smoothen out the surface flaws. Also, it offers optimum protection.
Chemical friction modifiers and solid lubricant are the forms of dual protection that the Liqui Moly Ceratec provides
Liqui Moly Mos2 and Cera Tec are two great oil additives at a very affordable price. The work purpose of these two additives is also the same, but you will still find some differences. The reason for this comparison is to help you understand which additive might be the best for your car.
The main difference between Liqui Moly Mos2 and Cera Tec is that Liqui Moly Mos2 is a metallic oil additive that forms a protective film on engine parts, while Liqui Moly Cera Tec uses ceramic particles to protect and seal the engine. Both additives are made by Liqui Moly, a well-known company that produces high-quality automotive products.
One of the main benefits of using an oil additive is that it can help reduce friction. Liqui Moly Mos-based additives are very good at this, and they have been shown to provide significant reductions in friction. This can lead to increased fuel economy, reduced wear on engine parts, and a longer life for your engine.
Cera Tec is also a great option, it has ceramic particles that can help reduce friction between metal parts. However, Cera Tec doesn’t work as well as Liqui Moly Mos-based additives in reducing wear on engine parts and increasing fuel efficiency.
There are some benefits of reducing friction in the engine. To begin with, it lowers resistance, which results in improved and smoother engine efficiency. This improves fuel consumption as well. Also, since less friction requires minor wear, the engine can last longer. Oil additives are the simplest and most cost-effective means of reducing friction.
Any people may be put off by the term “additive,” believing that these extra additives alter the properties of the oil and do more harm than good to their engine’s internals. However, we think it is essential to consider the proper use of additives in your engine and know what is appropriate for your machine. When used correctly, additives will significantly improve the efficiency and durability of your engine.
Liqui Moly Mos2 Additives
Liqui Moly Mos-based additives are the most common type of oil additive, and they have been shown to provide significant reductions in friction. These types of additives can be added to your engine’s oil or used as an additive for new motor oils. Liqui Moly Mos-based oil additives will help reduce wear on engine parts, increase fuel efficiency, and extend the life of your engine.
The additives are made from an oil-soluble lithium compound that is mixed with other components to form a paste or powder. This mixture is then applied to the surface of metal surfaces to protect against corrosion and wear. The viscosity of this liquid can be adjusted to meet the needs of your engine.
Liqui Moly Cera Tec Additives
Cera Tec is a ceramic-based additive that uses tiny particles of ceramics to protect and seal the engine. These additives are usually used in conjunction with motor oils, and they can be added at any time. The ceramics work to fill in the gaps between metal surfaces, which prevents them from coming into contact and causing wear.
Cera Tec additives are also very good at reducing friction, and they are more effective than Liqui Moly Mos-based additives in this regard. However, Cera Tec doesn’t work as well as Liqui Moly Mos-based additives in reducing wear on engine parts and increasing fuel efficiency.
Cera Tec promises to last up to 50,000km of use, but we consider using one medication at each oil change to ensure optimum efficacy. Although it is somewhat more expensive than the essential Oil Additive, it is well worth the extra protection for high-performance engines for anyone who needs the best protection for their machine.
Why You Need Liqui Moly?
If you ever wanted to improve the automotive power of your car, then a preferable way will be reducing drag. There are many options out there that you can follow. The most effective three options are using thinner engine oil, reducing friction within the engine, and the bodywork’s aerodynamics. Among these three ways, the easiest one is reducing friction, and also it brings some advantages to the engine.
Firstly, it reduces the resistance so that the engine could perform better and smoother. Then you’ll have a durable machine cause it offers better fuel efficiency. And this is where you need Liqui Moly Friction Modifier, and it doesn’t matter whether you choose Mos2 or CeraTec.
Now, you must get nervous by the word ‘Additives’ because there is a myth that if you add additives in the engine oil, it might change the characteristics of the oil and damage the internal parts of the engine.
Liqui Moly Mos-based oil additives will help reduce wear on engine parts, increase fuel efficiency, and extend the life of your engine. Cera Tec is a ceramic-based additive that uses tiny particles of ceramics to protect and seal the engine. These additives are usually used in conjunction with motor oils, and they can be added at any time.
Both the additives are best at their work and reduce engine friction and offer optimum protection. So by reading this article, you have to choose which one will work for you the best. And of course, you have to maintain and apply it properly; otherwise, it can cause harm to the engine.
Frequently Asked Questions (FAQ)
Can I mix MoS2 with ceratec?
Yes, you can mix MoS2 with ceratec. This combination can help improve the overall performance of your system.
|Check Price on Amazon||Check Price on Amazon|